iZone Clip In Low Zone Dampers 200mm

Description

Description

The CZDK is an iZone in-line barrel damper kit

Diagram:

1. Tapered Flex duct spigot: A tapered flexible duct connection with molded barbs to assist in mechanically gripping the flexible duct on both ends of the damper body
2. Tapered Flex duct spigot
3. Insulation: Foil faced foam insulation is adhered to the damper body and all joints are vapour sealed with foil tape.
4. Damper motor: Zone CZDA motor. See specification here.
5. Damper blade sealing gasket: A foam sealing gasket is fitted to the damper blade stop to provide an air seal when the blade is fully closed.
6. Hanging points: Built in hanging points for either sheet metal or plastic straps

 

In-line Motorised Zone Damper Kit Specification
Model numbers	Model number	Nominal diameter mm	Configuration	O/A dimensions L x W x H
	CZDK20	200	Low profile	315 x 210 x 440
	CZDK25	250	Standard	340 x 285 x 440
	CZDK30	300	Standard	385 x 345 x 440
	CZDK35	350	Standard	440 x 395 x 440
	CZDK40	400	Standard	520 x 390 x 440
	CZDK45	450	Standard	595 x 390 x 440
	CZDKLP20	200	Low profile	315 x 210 x 440
	CZDKLP25	250	Low profile	380 x 210 x 440
	CZDKLP30	300	Low profile	460 x 210 x 440
	CZDKLP35	350	Low profile	550 x 210 x 440
	CZDKLP40	400	Low profile	625 x 210 x 440
Casing material	ABS plastic
Blade material	Engineered ABS plastic with glass additives
Operating Temperature	Up to 85oC
Insulation	10mm closed cell foam with reinforced foil facing adhered to the damper body
Damper blade Sealing gaskets	12mm open cell foam
Inclusion in assembled kit	Insulation,  damper body and blade, sealing gasket, CZDA, CDC12G cable

 

Includes:

–          In-line barrel damper

–          12 meter cable

–          CZDA drive open / drive closed 24V motor.